Wire Rope Wick 7x7 3/32 37mm 3 pack

316 Stainless Steel NOT galvanized
7x7 braid
3/32 inch diameter product. Measured with a micrometer it is about .1 inch / 2.54mm. Slightly bigger than 3/32nd inch
1.4 to 1.5 inches in length (35 to 38 mm in length)
NO nylon center thread.
Sold in a 3 pack

These are the correct diameter and length for the AGA-T+/T2 (tight fit) and the RSST.

If you want to "sleeve" these so you can skip having to oxidize them, you should buy some:
2mm or 3 mm EKOWOOL Silica Wick

Advanced User Item ! No Warranty, No Returns ! Please do your research before making your purchase !

Safety Note: Please torch till glowing, boil in distilled water or soak in Everclear, rinse and torch again before using.
USE AT YOUR OWN RISK !

A Note on Size Measurements:
Our product naming is based off of the product name from the manufacturer.
Measuring SS Wire rope with a micrometer is tricky at best because:
The surface is not uniform. Wire rope is a braid with a surface shape that resembles a spiral. Micrometer calipers are flat and narrow. Not a happy marriage.
Wire Rope is compressible. You might think "Hey.. this is steel.. what do you mean it compresses ?" It is a braid, so there is a small amount of slack in each twist which allows for compression, so getting an accurate measurement is tricky.
Steel expands/contracts with temperature.
This is GOOD wire rope from a premier manufacturer. We are proud to sell it. That said, we cannot accept returns because of issues of size / fit / color.