Please read this entire page before ordering !
Wire Rope Wick
316 Stainless Steel NOT galvanized
7x19 braid
3/32 inch diameter product. Measured with a micrometer it is about .1 inch / 2.54mm. Slightly bigger than 3/32nd inch
1.4 to 1.5 inches in length (35 to 38 mm in length)
NO nylon center thread
Sold in a 3 pack
These are the correct diameter and length for the AGA-T+/T2 (tight fit) and the RSST.
If you want to "sleeve" these so you can skip having to oxidize them, you should buy some:
2mm or 3mm EKOWOOL Silica Wick
Advanced User Item ! No Warranty, No Returns ! Please do your research before making your purchase !
Safety Note: Please torch till glowing, boil in distilled water or soak in Everclear, rinse and torch again before using.
USE AT YOUR OWN RISK !
A Note on Size Measurements:
Our product naming is based off of the product name from the manufacturer.
Measuring SS Wire rope with a micrometer is tricky at best because:
The surface is not uniform. Wire rope is a braid with a surface shape that resembles a spiral. Micrometer calipers are flat and narrow. Not a happy marriage.
Wire Rope is compressible. You might think "Hey.. this is steel.. what do you mean it compresses ?" It is a braid, so there is a small amount of slack in each twist which allows for compression, so getting an accurate measurement is tricky.
Steel expands/contracts with temperature.
This is GOOD wire rope from a premier manufacturer. We are proud to sell it. That said, we cannot accept returns because of issues of size / fit / color.
16 Reviews Hide Reviews Show Reviews
-
works great on RSST
Wicks good with no dry hits!!
-
Works Great
These wicks work great in the 26650 ihybrid beast.
-
Mesh replacement?
Well, my first try at wire rope went pretty well. This still needs to be primed (apply juice, burn off; repeat 2-3 times), then I wrapped a bit of organic cotton where the coil would go (I went down to the bottom of the deck with cotton, then wrapped the coil). Wicks much better than mesh, especially with high VG juice. Just waiting on life now, or I would have given it 5 stars!
This size fits the DID perfectly; If you sleeve with Ecowool, you might need to go one size thinner. -
Exactly what I was looking for.
These are perfect for my RSST. Just open the package and use.
-
good for Agat2 rsst
Never tried these but was very happy with how they wick. Tight fit on the agat2 but works great.
-
Wire Rope Wick 7x19 3/32 37mm 3 pack
Fit both my RSST and AGA T2 a sleeve of KP's 3mm ekowool and twisted 28awg kanthal and you produce an enormous cloud with the best TH I am growing to love this site. Thanks KP...
-
Very Surprised
I was very surprised with how well this works! It was suggested to me by Chris of KP and I gotta say I am loving it, I haven't gone back to any of my old set-ups at all. You will need to sleeve your rope in something, whether it be silica or ceramic, ekowool, or cotton; I've found the cotton (plain cotton ball) to be really great and inexpensive and have tried the XC ceramic and cotton ball.
If you haven't tried rope yet and are thinking about it it would be a good idea to do so!
Although it fit nicely in my AGA T2, I might want to bring it down a size(5/64) if I buy some more. -
Works great
Built origanaly tipped with 3mm ekowool but kept falling off so tipped with 2 mm and wrapped coil then put in AGA T2 now works perfect
-
Great for RSST!
Works perfectly in the RSST. I covered it with 500 mesh, or XS-18... and it works great both ways. No need to tip at all. Best wick I have ever used. Just a note, it is not a snug fit in the RSST. It fits just right, and will give you a little room to move it around. They last forever, and flavor changes are super easy. Just rinse under hot water, dry with a towel, dry burn on your coils, and its good to go again.
